Series R117

Here you can configure your e-chain system® individually. All entries and changes are taking over to the part list which is situated at the end of the page.

Series R117 - Tube, snap-open along the inner radius from both sides

1. Effective chip protection, even hot chips
2. Smooth chip-repellent outer contour
3. Double stop-dog system for large unsupported length
4. Side opening lids and covered pin/bore connection
5. Side gliding surfaces for side-mounted operation
6. Lids snap-open along inner or the outer radius
7. KMA mounting bracket with attachment options from any side
8. Good ratio of outer to inner dimensions

R117 Series is suitable for the following types of applications:

Vertical: hanging applications, standing applications
Horizontal: unsupported applications ≤ 1,2 m
Rotary: rotating applications may be possible, please contact us

When to use Series R117

If a chip-resistant e-tube with 21 mm inner height is required
If an inner width up to 100 mm is required
For unsupported lengths up to 1,2 m and fill weights up to 1,5 kg/m
If an affordable e-tube is required that is openable from the inside or outside
If front attachment is required
For small bend radii

When not to use Series R117

For quiet run and smaller pitch
Energy tubes E2, Series R48

Installation dimensions


Part No. :
Inner width Bi [mm]:
Bending radius R [mm]:
Travel distance S [mm]:
Fixed end dM [mm]:
Chain length^** [mm]:
Number of chain links :
External width Ba [mm]:
H^* [mm]:
D [mm]:
K [mm]:
Hi [mm]:
Ha [mm]:
Weight per link [g]:
Weight [kg/m]:
* The required clearance height is HF = H + 25 mm. This should be taken into account for all application types
** The calculated length corresponds to the chain length without mounting brackets.

A=moving end, B=fixed end
Pitch: 30,5 mm
Links per m: 33
Travel: S
Tube length= S/2 + K

Unsupported length

Unsupported length versus fill weight
X axis: Unsupported length in m FLB/FLG
Y axis: Fill weight in kg/m
Lower scale: Travel S in m
FLB = Unsupported with permissible sag
FLG = Unsupported with straight upper run

Price index:

Opening mechanism :

Personal contact

Application examples 3D-CAD Samples and catalog order E-Chain® Expert call Service life calculation PDF file Ask the product expert

Designing with igus®

2 mounting bracket variants

7 widths and 7 bend radii

Assembly instructions

Other installation types

Technical specifications

Strain reliefs

Interior separation

1. Separators

Product range


unassembled	assembled
Per . chain link

Please use Configurator for partitioning of interior and for filling with cables.

Call configurator


Part No. :

Pc. Add to part list

Online Services:

Option 1. Separators

They are used if a vertical division of the chain interior is required.
Standard Division with separator 1185.01
Separators are assembled every 2nd chain link as standard.

Mounting brackets

KMA pivoting

Angled polymer bracket

unassembled	assembled

Pivoting on the moving end

For short and long travels

For tight installation spaces

Corrosion-resistant

Pivoting on the fixed end, available if required

No strain relief can be integrated


:
Part No. :
A [mm]:
B [mm]:

unassembled	assembled

Fixed connection to the energy tube

Minimized outer width

for long travel applications

Connectivity for tie wrap plate

Front mounting not possible

Hanging, standing without supports


:
Part No. :
A [mm]:
B [mm]:

Part List

Personal contact

GToB Imprint General notes Data protection declaration

hanging (max.) [m]	20
standing (max.) [m]	3
max. vertical, long travels [m]	20

Material of chain links	igumid G
Min. permissible temperature [°C]	-40
Max. permissible temperature [°C]	120
Gliding speed (max.) [m/s]	0,5
Max. gliding speed [m/s²]	5
Speed FLG max. [m/s]	10
Speed FLG max. [m/s²]	100
Speed FLB max. [m/s]	3
Speed FLB max. [m/s²]	6
Flammability class of chain link	VDE 0304 IIC UL94 HB