1 from 2
igus-icon-lupe
igus-three-dimensional-model
- Part number: JVSI-0608-06
- Material: iglidur® J
- Shape: Clearance-free pre-loaded bearings
- Dimensions:
- d1 0.375 inch
- d2 0.5 inch
- b1 0.375 inch
- Adjust dimension
- Manufacturing method: Injection moulding
- Service life:
- Standard product range from stock
- radially and axially pre-tensioned plain bearings
- Completely free of clearance in unloaded state
- Material: iglidur® J
- Maintenance-free and calculable service life
iglidur® J | The versatile endurance runner
iglidur® J is characterised by the lowest coefficients of friction in dry operation and its very low stick-slip tendency. With a maximum recommended surface pressure of 35MPa, iglidur® J is not suitable for extreme loads.
Typical applications
- Vending machinery
- Printing industry
- Beverage industry
- Aviation
- Cleanroom
When to use it?
- For high speeds
- When highest wear resistance at low to medium pressures is required
- Low wear against different shafts
- When a low coefficient of friction in dry operation is requested
- For vibration dampening
- When good chemical resistance is required
- For best performance with soft shaft materials
- Low moisture absorption
When not to use it?
- When high pressure loads occur
- When temperatures of greater than +120°C occur in the short term
- When a cost-effective bearing for occasional movements is sought
Unsure if it fits?
