My contact person
igus® Ireland

51A Caswell Road

Brackmills

Northampton NN4 7PW

+44 1604 677240

Electric motors

Cost-effective and scalable motors for linear axes, linear robots and delta robots
The portfolio of igus® includes stepper motors in several sizes, extendable with encoders and brakes, cost-effective and quiet DC motors, which can also be operated via battery without complex external power electronics, and EC motors for fast, powerful movements. Gearboxes that reduce the output speed and thus increase the available drive torque.
The motors are used, among other things, in packaging and inspection technology, for example in sensor and camera travel - also in the food sector, outdoors and areas exposed to splashes and water spray.
 

Products

Filter

Size
Electrical information
Fitting
System
Design

Number of products: 35

drylin® E lead screw stepper motor with strands and encoder, NEMA 17
  • Installation size: NEMA17/flange installation size 42mm
  • Protection class motor housing: IP40 
  • Holding torque: 0.50Nm
  • Nominal current: 1.80A
  • Motor connection: strands and encoder, JST connector

from 265.93 USD/Pc.

To the product page
drylin® E lead screw stepper motor with strands and encoder, NEMA 11, short type
  • Installation size: NEMA11/flange installation size 28mm
  • Protection class motor housing: IP40 
  • Holding torque: 0.06 Nm
  • Nominal current: 0.67 A
  • Motor connection: strands and encoder, JST connector
drylin® E lead screw stepper motor with strands, NEMA 11, short type
  • Installation size: NEMA11/flange installation size 28mm
  • Protection class motor housing: IP40 
  • Holding torque: 0.06 Nm
  • Nominal current: 0.67 A
  • Motor connection: strands with JST connector
drylin® E lead screw stepper motor with strands and encoder, NEMA 17, short type
  • Installation size: NEMA17/flange installation size 42mm
  • Protection class motor housing: IP40 
  • Holding torque: 0.20Nm
  • Nominal current: 1.40A
  • Motor connection: strands and encoder, JST connector
drylin® E lead screw stepper motor with strands, NEMA 17, short type
  • Installation size: NEMA17/flange installation size 42mm
  • Protection class motor housing: IP40 
  • Holding torque: 0.20Nm
  • Nominal current: 1.40A
  • Motor connection: strand with JST connector
drylin® E stepper motor with connector, NEMA 17
  • Installation size: NEMA17/flange installation size 42 mm
  • Protection class motor housing: IP65 (Shaft seal IP52)
  • Holding torque: 0.50 Nm
  • Nominal current: 1.80 A
  • Motor connection: Metric connector

from 198.00 USD/Pc.

To the product page
drylin® E stepper motor with stranded wire, NEMA 17
  • Installation size: NEMA17/flange installation size 42mm
  • Protection class motor housing: IP65 (shaft seal IP52), motor with stranded wires IP40
  • Holding torque: 0.5Nm
  • Nominal current: 1.80A
  • Motor connection: Stranded wire

from 75.00 USD/Pc.

To the product page
drylin® E stepper motor with connector and encoder, NEMA 17
  • Installation size: NEMA17/flange installation size 42 mm
  • Protection class motor housing: IP65 (Shaft seal IP52)
  • Holding torque: 0.50 Nm
  • Nominal current: 1.80 A
  • Motor connection: Metric connector

from 336.00 USD/Pc.

To the product page
drylin® E stepper motor with connector and encoder, NEMA 23XL
  • Installation size: NEMA23XL/flange dimension 60 mm
  • Protection class motor housing: IP65 (Shaft seal IP52)
  • Holding torque: 3.50 Nm
  • Nominal current: 4.20 A
  • Motor connection: Metric connector

from 529.00 USD/Pc.

To the product page
drylin® E stepper motor with connector, encoder and brake, NEMA 23XL
  • Installation size: NEMA23XL/flange dimension 60 mm
  • Protection class motor housing: IP65 (Shaft seal IP52)
  • Holding torque: 3.50 Nm
  • Nominal current: 4.20 A
  • Motor connection: Metric connector

from 718.35 USD/Pc.

To the product page
drylin® E stepper motor with connector, NEMA 34
  • Installation size: NEMA34/flange installation size 86 mm
  • Protection class motor housing: IP65 (Shaft seal IP52)
  • Holding torque: 5.90 Nm
  • Nominal current: 6.40 A
  • Motor connection: Metric connector

from 458.80 USD/Pc.

To the product page
drylin® E stepper motor with connector and encoder, NEMA 34
  • Installation size: NEMA34/flange installation size 86 mm
  • Protection class motor housing: IP65 (Shaft seal IP52)
  • Holding torque: 5.90 Nm
  • Nominal current: 6.40 A
  • Motor connection: Metric connector

from 591.89 USD/Pc.

To the product page
drylin® E lead screw stepper motor with strands, NEMA 11
  • Installation size: NEMA11/flange installation size 28 mm
  • Protection class motor housing: IP40 
  • Holding torque: 0.12 Nm
  • Nominal current: 1.00A
  • Motor connection: strands with JST connector

from 103.58 USD/Pc.

To the product page
drylin® E stepper motor with stranded wire, NEMA 11
  • Installation size: NEMA11/flange installation size 28mm
  • Protection class motor housing: motor with stranded wires IP40 (shaft seal IP52)
  • Holding torque: 0.12Nm
  • Nominal current: 1.00A
  • Motor connection: strands and encoder, JST connector
drylin® E stepper motor with stranded wire and encoder, NEMA 11
  • Installation size: NEMA11/flange installation size 28mm
  • Protection class motor housing: motor with stranded wires IP40 (shaft seal IP52)
  • Holding torque: 0.12Nm
  • Nominal current: 1.00A
  • Motor connection: metric connector