My contact person
igus® Ireland

51A Caswell Road

Brackmills

Northampton NN4 7PW

+44 1604 677240
igus® Ltd.

Caswell Road

Northampton, NN4 7PW

01604 677240

Shop Stepper, DC & EC/BLDC Motors online

Number of products: 102

New

drylin® E stepper motor, stranded wires with JST connector and encoder, NEMA 17

  • Installation Size: NEMA 17 / flange dimension 42 mm
  • Protection class: IP40
  • Holding torque: 0.50 Nm
  • Nominal current: 1.80 A
  • Motor connections: stranded wires with JST connector, encoder with JST connector
Upon request
1 different sizes available.
Ready for shipping:
1 usually shipped in 3 working days
To the product page
CE
EMV guideline
New

drylin® E stepper motor, stranded wires with JST connector and encoder, NEMA 23

  • Installation size: NEMA 17 / flange dimension 42 mm
  • Protection class: IP40
  • Holding torque: 2.00 Nm
  • Nominal current: 4.20 A
  • Motor connections: stranded wires with JST connector, encoder with JST connector
Upon request
1 different sizes available.
Ready for shipping:
1 usually shipped in 3 working days
To the product page
CE
EMV guideline
New

drylin® E Stepper motor, stranded wires with JST connector and encoder, NEMA 24

  • Installation size: NEMA 24 / flange dimension 60 mm
  • Protection class: IP40
  • Holding torque: 3.50 Nm
  • Nominal current: 4.20 A
  • Motor connections: stranded wires with JST connector, encoder with JST connector
Upon request
1 different sizes available.
Ready for shipping:
1 usually shipped in 3 working days
To the product page
CE
EMV guideline
New

drylin® E stepper motor, stranded wires with Molex connector and encoder, NEMA 34

  • Installation size: NEMA 34 / flange dimension 86 mm
  • Protection class: IP40
  • Holding torque: 5.90 Nm
  • Nominal current: 6.40 A
  • Motor connections: stranded wires with Molex connector, encoder with JST connector
Upon request
1 different sizes available.
Ready for shipping:
1 usually shipped in 3 working days
To the product page
CE
EMV guideline
New

drylin® E EC/BLDC motor with stranded wires, Hall, encoder and brake, NEMA 23

  • Installation size: NEMA 23 / flange dimension 56 mm
  • Protection class: IP40
  • Rated torque: 0.60 Nm
  • Rated voltage: 48 VDC
  • Motor connections: stranded wire, encoder with stranded wire, brake with stranded wire
  • brake voltage: 24V
  • integrated brake for vertical loads
Upon request
1 different sizes available.
Ready for shipping:
1 usually shipped in 3 working days
To the product page
CE
EMV guideline
New

drylin® E EC/BLDC motor brushless with hall/encoder and brake, flange size 60mm

  • Flange dimension 60 mm/NEMA24
  • Protection class motor housing: IP40
  • Nominal voltage: 48V DC
Upon request
1 different sizes available.
Ready for shipping:
1 usually shipped in 3 working days
To the product page
CE
EMV guideline
New

drylin® E EC/BLDC motor with stranded wires, Hall, encoder and brake, NEMA 34

  • Installation size: NEMA 34 / flange dimension 86 mm
  • Protection class: IP40
  • Rated torque: 1.00 Nm
  • Rated voltage: 48 VDC
  • Motor connections: stranded wire, encoder with stranded wire, brake with stranded wire
  • brake voltage: 24V
  • integrated brake for vertical loads
Upon request
1 different sizes available.
Ready for shipping:
1 usually shipped in 3 working days
To the product page
CE
EMV guideline
New

drylin® D7 stepper motor output stage (NEMA11/17) with cycle/direction

  • Can control stepper motors with up to 2.7A continuous current at supply voltage of up to 48V
  • Ready to use immediately
  • Easy control
  • Exact positioning
Upon request
1 different sizes available.
Ready for shipping:
1 usually shipped in 3 working days
To the product page
CE
EMV guideline
New

drylin® E EC/BLDC motor with stranded wires, Hall, encoder and brake, NEMA 17

  • Installation size: NEMA 17 / flange dimension 42 mm
  • Protection class: IP40
  • Rated torque: 0.30 Nm
  • Rated voltage: 48 VDC
  • Motor connections: stranded wire, encoder with stranded wire, brake with stranded wire
  • brake voltage: 24V
  • integrated brake for vertical loads
Upon request
1 different sizes available.
Ready for shipping:
1 usually shipped in 3 working days
To the product page
CE
EMV guideline
New

drylin® D8 stepper motor output stage (NEMA23/24) with cycle/direction

  • Can control stepper motors with up to 4 A continuous current at supply voltage of up to 48V
  • Ready to use immediately
  • Easy control
  • Exact positioning
Upon request
1 different sizes available.
Ready for shipping:
1 usually shipped in 3 working days
To the product page
CE
EMV guideline
New

drylin® D9 stepper motor output stage (NEMA34) with cycle/direction

  • Can control stepper motors with up to 7A continuous current at supply voltage of up to 48V
  • Ready to use immediately
  • Easy control
  • Exact positioning
Upon request
1 different sizes available.
Ready for shipping:
1 usually shipped in 3 working days
To the product page
CE
EMV guideline

drylin® D1 motor control system for stepper, DC and EC/BLDC motors

  • A wide range of automation tasks by simple parameterisation, no programming necessary
  • For single axes, line, flat, linear and room linear robots and delta robots
  • No software installation or app required
  • Use with PC, tablet or smart phone
  • Stepper (ST), DC and EC/BLDC motors with up to 21A peak currents and 48V
  • Digital inputs/outputs, analogue inputs, CANopen, ModbusTCP (CANopen Gateway) for connection to master control systems such as Siemens or Beckhoff
     
    You can find all relevant documents in the downloads below.
     

    TEST BEFORE INVEST - Try out the motor control system here with the online simulation before you buy it
from 486.00 USD/Pc.
1 different sizes available.
Ready for shipping:
1 ready for shipping in 24 hours
To the product page
CE
EMV guideline
New

drylin® D2 motor control system for stepper, DC and EC/BLDC motors

  • A wide range of automation tasks by simple parameterisation, no programming necessary
  • For single axes, line, flat, linear and room linear robots and delta robots
  • No software installation or app required
  • Use with PC, tablet or smart phone
  • Stepper (ST), DC and EC/BLDC motors with up to 21A peak currents and 48V
  • Digital inputs/outputs, analogue inputs, CANopen, ModbusTCP (CANopen Gateway) for connection to master control systems such as Siemens or Beckhoff
     
    You can find all relevant documents in the downloads below.
     

    Further information on dryve D1 info page
Upon request
1 different sizes available.
Ready for shipping:
1 usually shipped in 3 working days
To the product page
CE
EMV guideline

drylin® D3 for direct current motors

  • Simple automation directly using the control system without software and/or PC
  • Operation with limit switch or via power consumption
  • Left/right operation and speed control directly on the housing
  • Option for external switches/joysticks
  • Various modes of operation, such as tip operation and start to finish (semi-automatic)
  • Various adjustable acceleration ramps
  • Power supply via 24V/2.5A
     
    All relevant documents for dryve D3 can be found in the downloads.
from 170.64 USD/Pc.
1 different sizes available.
Ready for shipping:
1 ready for shipping in 24 hours
To the product page
CE
EMV guideline

drylin® D3-LM motor control system for DC motors with loop mode

  • Same dimensions as the standard D3
  • Extended functions for "Micro Automation"
  • Individually pre-programmed pendulum movements
  • Individually pre-programmed pause times between movements
     
    All relevant documents for D3 dryve:
    Go to download portal
CE
Following 2014/35/EU

Linear motion technology

linear motion technology automation with stepper motors, direct current motors and EC/BLDC motors.