Change Language :

Electrostatically conductive 3D energy chain

energy chains made of conductive ESD material are used to prevent static charges in the manufacturing processes of electronic components or assemblies. As early as 1992, igus® GmbH, together with the PTB (Physikalisch-Technische-Bundesanstalt) in Braunschweig, carried out measurements of the electrical surface leakage resistance for igus® energy chain with the special material igumid® GC, supplemented by further certifications in 1998 and 1999 according to DIN 53482 as well as the guideline on static electricity ZH1/200 of the Hauptverband der gewerblichen Berufsgenossenschaften.

Closed type especially for robots and three-dimensional applications

triflex® R TRC ESD
Shop for triflex® R ESD

Your advantages with ESD products

  • ESD material tested with over 10 million cycles for the highest requirements
  • Individual chain links can be replaced and it is not necessary to replace the entire system or dress pack
  • No waiting time, as sizes TRC.40, TRC.60 & TRC.70are available from stock in ESD design
  • Proven for years in use in explosion-proof areas

Design features of the igus® triflex® R series TRC e-chains®:

  • Approx. ±10° torsion per chain link
  • High tensile strength due to ball and socket joint
  • Option with fibre-rod for partial directional control and stiffening
  • No continuous support elements such as steel cable, spring elements or similar required
  • Wide range of accessories
  • Optional retraction systems guide the 3De chains® safely space-saving on the robot arm and reliably prevent loop formation
  • TRC - safe, closed, swarf-repellent
  • Smooth, robust outer contour to prevent snagging
  • High torsion resistance
  • Easy to shorten and lengthen

Typical industries and applications

  • Axis 3 to 6 on robots
  • Multi-axis machine tools
  • Wet and cold cells
  • Painting applications and ESD
  • Sand and dust areas
  • Linear motors
  • General mechanical engineering etc.

from stock available sizes of ESD chains

Other sizes of triflex® R e-chain® in ESD material available upon request

TRC.40 ESD
TRC.40 ESD
TRC.60 ESD
TRC.60 ESD
TRC.70 ESD
TRC.70 ESD

Mounting bracket in ESD material

triflex ESD bracket.png

Available with strain relief from stock

  • Quick and easy fixing of the energy chain
  • Shortest downtimes when replacing a filled triflex® R
  • Mounting bracket with strain relief teeth (1)
  • Mounting bracket without strain relief teeth (2)
  • mounting bracket as intermediate bracket (3)
  • Quick assembly with captive snap-lock mechanism
  • Adaptation holes for common robot types
  • End or intermediate mounting possible
Shop for mounting brackets in ESD material

With strain relief in 3 sizes in ESD material available from stock

TR.40.01 mounting bracket with strain relief

TR.40.01.ESD

TR.60 and TR.70.01.ESD

TR.60.01.ESD + TR.70.01.ESD

Possible applications of the mounting bracket

Standard AE triflex R

1 = mounting bracket with strain relief TR.XX.01
2 = mounting bracket without strain relief TR.XX.02
3 = mounting bracket as intermediate bracket TR.XX.02
Strain relief is possible at the fixed end and/or at the moving end! 
Standard: plain hole in ø F
Option: with threaded bushing, steel, M6/M8

ESD test

100% of the produced ESD e-chains® are checked for their continuous conductivity from one end to the other

Conductivity of igus®® products made from igumid® ESD

In contrast to temporarily applied conductive surface coatings or volatile incorporated antistatic agents, the additives used allow long-term, permanent and maintenance-free conductivity. To ensure conductivity, however, it is not enough for the individual components of an e-chain® to have conductivity; the entire e-chain® must have continuous conductivity from one end to the other. All products in this catalogue are optimised in this respect and the continuous conductivity is measured and documented by a 100% test before delivery.
Only e-chain® that have passed this test are subsequently labelled with the test seal and delivered. The colour of the triflex® R chains is a special feature, as they are not slate grey (≈RAL7015) but still black, similar to ≈RAL9004. Unfortunately, this makes it somewhat more difficult to distinguish them from standard materials. However, this is clearly defined by the material stamp.

Contact us

Contact details

Seán Ryan
Seán Ryan086 0329555Submit form

Opening hours

Office hours

Monday to Friday from 8 am - 8 pm.

Live chat:
24h