- Large inner height and therefore cost-effective
- Cables are protected from swarf
- Easy to fill, lids openable from both sides along the inner or outer radius
- Low noise operation due to integrated brake
- Separator notches integrated into the e-tube link and lid for side-mounted applications
My contact person
igus® Ireland
IE(EN)
R2.1 e-tube - low priced chip protection
Cost-effective, strong e-tubes with 26, 40, 48 and 75mm inner height. Openable and removable lids along inner or outer radius, openable from both sides. Designed to provide a tight seal, with strong double stop-dogs for high fill weights and unsupported lengths.
The video shows how simple it is to assemble Series R2.75 e-chains®
Advantages of the R2.1 system:
Lids openable from both sides along the outer radius
R2.26
Inner height hi: 26 mm
Inner widths Bi:25 - 150 mm
Bend radii R:60 - 175 mm
Unsupported length: max. 2.00 m
R2.40
Inner height hi:40 mm
Inner widths Bi:50 - 200 mm
Bend radii R:80 - 250 mm
Unsupported length: max. 2.75 m
R2.48
Inner height hi:48 mm
Inner widths Bi: 50 - 250 mm
Bend radii R:100 - 250 mm
Unsupported length: max. 2.75 m
R2.75
Inner height hi:75 mm
Inner widths Bi:111 - 200 mm
Bend radii R:130 - 400 mm
Unsupported length: max. 3.00 m
Lids openable from both sides along the inner radius
R2i. 26
Inner height hi:26 mm
Inner widths Bi: 25 - 150 mm
Bend radii R: 60 - 175 mm
Unsupported length: max. 2.00 m
R2i. 40
Inner height hi:40 mm
Inner widths Bi: 50 - 200 mm
Bend radii R:80 - 250 mm
Unsupported length: max. 2.75 m
R2i. 48
Inner height hi:48 mm
Inner widths Bi: 50 - 250 mm
Bend radii R:100 - 250 mm
Unsupported length: max. 2.75 m
e-tubes made from igumid HT material for hot swarf of up to +850 °C available upon request
Electrically conductive ESD
e-tubes available upon request
UL94-V0 classifications upon request
