Other uses for motion plastics in the bicycle industry

Vibration dampening, wear resistance and absolute freedom from corrosion and maintenance: with these specifications, our plastic bearings demonstrate their strengths not only in mountain and cargo bikes, but also in various other lightweight vehicles and bicycle accessories. There are, for example, the many joints in folding bikes, prams and bicycle racks, the control unit of children's bikes and e-scooters or the height adjustment in the bicycle assembly stand:

Various areas of application in the bicycle industry

Folding bike with iglidur plain bearings

1 Folding mechanism for folding bicycle

Ideally small enough to travel on the train free of charge as a piece of luggage or be stored in the car to save space: folding bicycles are currently undergoing rapid development with the change in mobility - with less weight, more comfort and sophisticated folding technology that is quick and easy to use. With our bushings made of wear-resistant high-performance plastic, such as iglidur J3, we offer a lightweight and corrosion-free alternative to metal bearings for the many joint points in the folding mechanism, which require neither lubrication nor maintenance. Opening and closing, often and over a long period of time, without squeaking or rattling.

Plain bearing iglidur J3

Excellent friction coefficients

Excellent wear resistance

Low moisture absorption

Good wear resistance under water and high media resistance

Resistant to edge pressure as well as shocks and impacts

Insensitive to dirt and dust

Lightweight

Lubrication-free

More about iglidur J3 in the online shop

No bearing clearance, no relubrication: iglidur in the foldable mountain bike

The Austrian company Tonkel Om handmades in Salzburg has developed a mountain bike that can be folded to a pack size of 75 x 34 x 25cm in just 90 seconds without any tools. For the many bearing points in the folding mechanism, the developers were looking for a resilient, wear-resistant bearing material that was as light as possible and resistant to all kind of weathering effects. iglidur bushings are the perfect solution ...

Find out more about this application

Children's bike with iglidur plain bearings

2 Steering head bearing and bottom bracket bearing in a children's bicycle

iglidur J3 plain bearings are also used successfully in the headset and as inner bearing of children's bicycles. The reason is simple: they are robust, cost-effective and resistant to moisture, dirt and impacts - ideal specifications when you consider that a children's bike is not only exposed to all sorts of weather conditions, but also falls over, or ends up in a puddle or in the sand on a playground. You are spared problems with conventional ball bearings, which become rickety due to dirt ingress, loss of lubricant and rust.

Plain bearing iglidur J3

Excellent friction coefficients

Excellent wear resistance

Low moisture absorption

Good wear resistance under water and high media resistance

Resistant to edge pressure as well as shocks and impacts

Insensitive to dirt and dust

Lightweight

Lubrication-free

More about iglidur J3 in the online shop

3 Trike's front suspension

Still a niche, but increasingly popular: recumbent bicycles, especially three-wheeled ones, are probably the most comfortable way to ride a bike. Depending on the intended use and ground, there are now many types on the market, including spring-mounted and agile speedsters for rough off-road terrains. iglidur G plain bearings are small, lightweight, resistant to dirt, water and shocks. Due to these specifications, they are successfully used, among other things, in spring-mounted front suspensions.

iglidur G plain bearings

Excellent coefficient of friction

Resistant to edge pressure

Insensitive to shocks and impacts

Particularly resistant to dirt and dust

Resistant to high loads (>60N/mm²)

Lubrication-free

More about iglidur G in the online shop

Small, light, robust: iglidur plain bearings in the trike from Azub

With the "Trike of the Year", AZUB Bike secured a prestigious prize for its TRIcon 26 with an innovative rear fork back in 2015. It also uses high-performance components such as high-strength Grade 5 titanium in the front suspension. It is complemented by dry-operating plastic bearings made of iglidur G. The all-round bearing not only requires no lubrication or maintenance, but is also resistant to dust and dirt, so it has a long service life. Unlike metallic plain and ball bearings, it is corrosion-free at a fraction of the weight.

Find out more about this application

4 E-scooter head tube

For several years now, electric scooters, in particular rental scooters, have been conquering cities. Ridden in wind and weather and on different ground conditions, with changing users who don't always handle them carefully, the scooters have to withstand a lot. With our lubrication-free plain bearings, maintenance costs can be reduced, and the scooters do not need to be removed from service for bearing maintenance, which increases their use efficiency. The range of the battery benefits from the light weight of our bearings. Bushings made of iglidur E material are particularly suitable in suspension forks, they are vibration-dampening and have virtually no stick-slip effect. For use in the head tube, we recommend our heavy-duty iglidur Q plain bearings.

iglidur E plain bearings

Wear-resistant material for continuous operation

Low coefficients of friction

Particularly suitable for linear movements

Particularly long service life in combination with aluminium shafts

Vibration-dampening

Upper long-term application temperature 90°C

Upper short-term application temperature 120°C

More about iglidur E in the online shop

Plain bearing iglidur Q

Resistant to high loads (>60N/mm2)

Specially developed for extreme loads

Resistant to shocks and impacts

Excellent coefficient of friction

Corrosion-resistant

Small installation space required

Lubrication-free

More about iglidur G in the online shop

Cantilever brake with iglidur plain bearings

5 Cantilever brake

V-brakes are the classic bicycle brakes as they are lightweight, cost-effective and easy to repair and maintain thanks to their simple design. As far as maintenance is concerned, you can do without, at least at the bearing points, if you use our dry-running plastic bushings, which are vibration-damping, weather-resistant and lightweight. iglidur J is the perfect material for use on V-brakes and classic cantilever brakes.

Plain bearing iglidur J

Good wear resistance at medium temperatures

Excellent coefficient of friction

Low moisture absorption

Resistant to edge pressure

Insensitive to shocks and impacts

Resistant to dirt and dust

Lubrication-free

More about iglidur J in the online shop

Bicycle assembly stand with drylin linear guides and e-chain

6 Bicycle assembly stand

People who often repair bicycles use assembly stands to securely fix the bike at a comfortable working height. In addition to simple models, there are also electrically adjustable high-end versions that offer, e.g. mechanics in workshops the possibility to lift heavy bikes such as e-bikes in a way that is easy on their backs. Various igus products are successfully used in such lifting platforms: lubrication- and maintenance-free drylin linear rail systems, resilient chainflex cables, which are specially made for moving applications, as well as compact e-chains from the E2 series, which ensure a particularly long service life of the cables.

drylin W linear guide

14 rail profiles, 50 carriage versions
100% maintenance- and lubrication-free
Corrosion-free and wear-resistant
Resistant to dirt, dust and humidity
Extremely quiet operation
Up to 40% more cost-effective than recirculating ball bearing guides

Find out more about the drylin® W series

e-chains E2 series

Reliable protection for moving cables
Light and strong
Quiet operation
Easy and fast filling
Available open with crossbars or closed as a tube

Find out more about our e-chains for medium loads

chainflex cables

Specially developed for movement
Suitable for small installation spaces and particularly tight bend radii
Up to 36 months chainflex guarantee
Available from stock, from 1m length within 24 hours

Find out more about chainflex

7 bicycle racks

Bike racks that are mounted on the roof or rear of the car are the perfect transport solution for anyone who doesn't have a trailer, pickup truck bed or motorhome bike garage. Particularly popular: foldable models that can be easily transported when dismantled and stored compactly, equipped with a tilting mechanism that allows access to the trunk. Manufacturers use plain bearings and thrust washers from our iglidur J series to ensure that folding and tilting work easily for a long time. Moisture, dirt, impacts and edge loads are no problem.

Plain bearings and thrust washers iglidur J

Good wear resistance at medium temperatures

Excellent coefficient of friction

Low moisture absorption

Resistant to edge pressure

Insensitive to shocks and impacts

Resistant to dirt and dust

Lubrication-free

More about iglidur J plain bearings and thrust washers in the shop

8 bearings in a pram

People who spend a lot of money on a pram expect it to work reliably. Even after long periods of use in any weather and harsh environments, such as on playgrounds or beaches, where the material comes into contact with sand and sea water. In these situations, metallic ball bearings and bushings with PTFE coating suffer particularly. Sand adhering to the lubricated bearings, loss of lubricant/gliding layer and rust are problems that can be avoided with our dry-running plastic bearings. No more jamming or squeaking wheels, no more rickety bearing points. iglidur G plain bearings are lightweight, cost-effective and robust - just right for use in folding and articulated joints, height adjustment, swivel wheels and wheel hubs.

iglidur G plain bearings

Excellent coefficient of friction

Resistant to edge pressure

Insensitive to shocks and impacts

Particularly resistant to dirt and dust

Resistant to high loads (>60N/mm²)

Lubrication-free

More about iglidur G in the online shop

igubal EGLM spherical bearings in the JogAlong stroller

Light, cost-effective, uncomplicated: igubal spherical bearings in jogging strollers

The JogAlong stroller combines the usual transport function with sporting activity. It has ergonomically shaped arm levers that imitate the natural swing of the arm. The heart of the construction are igubal spherical plain bearings made of solid plastic. They enable three degrees of freedom, reduce the complexity of the assembly and thus reduce costs and weight compared to the originally intended designs. Being lightweight, lubrication-free and corrosion-free makes them the perfect alternative to metal bearings.

Learn more about this application

Please choose your delivery location